Research & Publications

Research & Publications

Chandigarh Engineering College Department of Mechanical Engineering Research Publications in Journals 2017-18

Sr. No.Name of Faculty AuthorsName of Author with YearName of Paper
1Dr. Sachin MohalThreeMohal, Sangwan & Kumar 2017Mohal, S., Sangwan, S.S. & Kumar, R., 2017, ‘Experimental Investigations in Powder Mixed Electric Discharge Machining of Al6063 Aluminum Alloy’, Research Cell: an International Journal Of Engineering Sciences 25, 97-102.
2Dr. Rajesh SharmaTwoArora & Sharma 2017Arora, R. & Sharma, R., 2017, ‘Experimental investigation of evaporative condenser with two cooling pads for window air-conditioner’, Research Cell: an International Journal of Engineering Sciences 25, 11-16.
3Mr. Arvind KumarThreeKumar, Singh & Kumar 2018Kumar, A., Singh , H. & Kumar, V., 2018, ‘Study the Parametric Effect of Abrasive Water Jet Machining on Surface Roughness of Inconel 718 using RSM-BBD technique’, Materials and Manufacturing Process, https://doi.org/10.1080/10426914.2017.1401727 (SCI)
4Mr. Ravinder SinghThreeBhardwaj, Singh & Singh 2017Bhardwaj, B., Singh, R. & Singh, R., 2017, ‘To Study The Effects of Welding Parameters on MIG Welding of Stainless Steel Alloy-202’, International Journal of Science Technology & Engineering, 4(1), 131-140.
5Mr. Parveen SainiOneSaini 2017 Saini, P.K., 2017 ‘Performance and analysis of electric discharge machining on AISI D3 Steel by using Taguchi Method’, Journal of Engineering Research and Studies, 3(3), 17-20.
6Mr. Rahul MehraTwoSrivastava & Mehra 2017Srivastava, H. & Mehra, R., 2017, ‘Fabrication of EN-9 round bar using center lathe machine and calculating its tensile strength under universal testing machine’, Journal of Emerging Technologies and Innovative Research 4 (6), 234-239.
7Mr. Rakesh KumarThreeRakesh et al. 2017   Kumar, S., Kumar, R., & Kumar, M, 2017, ‘Experimental investigations of oxidation stability of biodiesel produced from Prunus armeniaca oil (apricot oil) and effect of various antioxidants on stability, engine performance and emission’. Fuel 216, 861–869.
8Dr. L.C. SingalThreeSingal et al. 2017Singal, L.C. Gill, RS & Kang PS,, 2017. ‘Estimating Mechanical Fatigue Life — A Review IJRASET’ 5, (12).
9Mr. Paramvir Singh KangThreeKang et al. 2017Kang PS, Singal, L.C. & Gill, RS, 2017, ‘Effectiveness of sintered abrasive in magnetic abrasive finishing-A Review’. IJAMTES, 7, 55-59.

Chandigarh Engineering College Department of Mechanical Engineering Research Publications in Conferences 2017-18

Sr. No.Name of Faculty AuthorsName of Author with YearName of Paper
1Mr. Rakesh KumarTwoRakesh et al. 2017Kumar, R. & Kumar, S., 2017, ‘Application of Biodiesel produced from Argemone Mexicana oil in Direct Injection Compression ignition Engine, International Conference on Advancements and Futuristic Trends in Mechanical & Material Engg., SUS Tangori, India, November 2-4, 2017.

Research and publication

Author(s)TitleNational/InternationJournalYear
Gurkiratsingh bhatiaCold Flow Analysis In An Annular Gas Turbine Combustor Using Cfd ToolInternationalIJAERD2016
Manmohan SinghInternationalIJERD2016
Rohit Kumar, Inderjeet SinghA review of friction stir welding on aluminum alloysNationalNational Conference2016
Ms. Aishna Mahajancomparative Study of Tyre Rubber and V-Belt Rubber:Composition and Mechanical PropertiesInternationalIOSR2016
Mr. Satish KumarEffect of Varying Surface Grinding Parameters on the Surface Roughness of Stainless SteelInternationalInternational Journal of Engineering Research and General Science2015
Mr. Ranjot Singh VirkModification in Fixture by Computer-Aided-Fixture Design (CAFD) in Manufacturing Process of Steering Nut to Reduce DefectsInternationalInternational Journal of Engineering Development and Research2015
Mr. Ramandeep Singh DhindsaAn Experimental Study on the performance of Liquid Desiccant Dehumidification systemInternationalMechanica confab2015
Mr.Gagandeep Singh DhindsaExperimental Study of Machining Characteristics of C-45 Steel using Electro Discharge MachiningInternationalIJCET2015
Mr. Ramandeep S. DeordaEffect of Tool Shoulder diameter on AA6101/B4C Composite Fabricated by Friction Stir ProcessingInternationalIJESIRD2015
Mr. Parveen SainiPaper titled “Study the Influence of EDM Parameters on Cobalt-Bonded Tungsten Carbide Conductive CeramicInternationalIJEMR2015
Mr. Gurkirat Singh Cold Flow Analysis in an Annular Gas Turbine Combustor using CFD Tool”InternationalIJAERD2015
Mr. Taljeet Singh“Modification in Fixture by Computer-Aided-Fixture Design (CAFD) in Manufacturing Process of Steering Nut to Reduce Defects”InternationalIJEDR2015
Mr. AnikateStudy the Influence of EDM Parameters on Cobalt-Bonded Tungsten Carbide Conductive Ceramic,InternationalIJEMR2015
Mr. FarmanExperimental investigation to evaluate the performance,emission,and combustion characteristics of diesel engine with neem oil biodiesel”InternationalIJESIRD,2015
Mr. Anam SinghAnam Singh, V.P. Agrawal,”CFD simulation of spray cooling: Review and Problems,”InternationalIJETMAS,2015
Mr. Ramesh kumarTo Study Effect of Austempering Time and Temperature On Spheriodal Graphite IronInternationalIJEMR2015
Author(s)TitleNational/InternationJournal
Dr. RS RajoriaNano Technology – Future AheadNationalTIME-2k8
Dr. RS RajoriaStudy of Charging Media in a Cement Ball MillNationalTIME-2k7
Dr. RS RajoriaStirling Miniature Cryocoolers – An OverviewNationalTIME-2k8
Dr. RS RajoriaAutomated CNC Part Programming and Process Planning For Turned ComponentsNationalTIME-2k8
Satish Kumar & N. P. SinghComparison of Thermal Performance of Solar Air Heater Having Thermal MassNationalProceeding
Satish Kumar & N. P. SinghExperimental Analysis of Thermal Performance of a Solar Air Heater Having Thermal Mass (Iron Chips) Placed on Collector Surface and Compare it with Simple Flat Plate Collector Solar Air Heater.NationalProceeding
Parveen kr. SainiInvestigating the effect of Tool and Work Material in Ultrasonic Machining of Titanium AlloysNationalNational Conference on Present Scenario and Advance Technology in Mechanical Engineering
HARJOT SINGHA REVIEW STUDY TO ANALYSE INFLUENCE OF EDM PARAMETERS ON MRR SURFACE ROUGHNESS AND TOOL WEAR RATE ON CBN AS WORK MATERIAL USING TAGUCHI L27NationalNational Conference ON advancement in Simulation & Experimental Techniques
HARJOT SINGHA Study Towards Multi-Response Optimization of Edm Process for Tungsten Carbideusing Response Surface MethodNationalNational Conference ON advancement in Simulation & Experimental Techniques
Rohit Kumar Inderjeet SinghA review of friction stir welding on aluminum alloysNationalNational Conference
NamePositionD.O. J.Education Quali.
Mr. Paramvir Singh KangAP6-Aug-09Ph.D pursuing
Mr. Gurpreet Singh BediAP16-Jan-07Ph.D pursuing
Mr. Ramandeep Singh DhindsaAP7-Sep-12Ph.D pursuing
Mr.Vikasdeep Singh MannAP8-Jul-12Ph.D pursuing
Mr. Inderjeet SinghAP9-Jul-12Ph.D pursuing
Mr. Ramandeep S. DeordaAP21-Jan-13Ph.D pursuing
Mr. Farman KhanAP24-Jul-13Ph.D pursuing
Mr. Pawan KumarAP18-Jul-14Ph.D pursuing
DateTopicResource Person
01.09.2016Understanding Simple and Principal Stresses & StrainsDr. Dhiraj Mahajan IIT Ropar
09.09.2016Latest Trends in manufacturing TechnologyDr.HarmeshKansal UIET
16.09.2016Operation ResearchMr. Amit Dixit BHEL, India
21.09.2016Industrial Automation, MechatronicsMr. Deepak Sharma
Prolific Systems Technologies Pvt. Ltd
23.09.2016Creativity, Innovation and EntrepreneurshipDr Deepika Bhalla& JPS Sibia
PTU Nalanda School of TQM & Entrepreneurship
10.10.2016Capacitor Discharge ignition and iSmart TechnologyMr. Dushyant Sharma
Dy. Manager HeroMotoCop Limited
21.10.2016Advancement in submerged arc welding.Dr. Jagjitsingh
PEC University of Technology
TitleRegistrationDate
Automated Mehndi Applying MachineTEMP/E1/ 31228/2015DELTEMP/E1/ 31228/2015DEL
Wireless Electricity Transmission System2507/DEL/201514/8/15
Head Mounted Display Navigation2510/DEL/201514/8/15
Handheld Drill Machine With Dust RemovalTEMP/E-1/24933/2015¬DEL14/8/15
A Plaster Of Paris (Pop) Applicator And Methods There of2472/DEL/201511/8/15
Prevention Of Engine Oil Leakage From Turbocharger2456/DEL/201510/8/15

PAY FEE ONLINE