Sr. No. Name of Faculty Authors Name of Author with Year Name of Paper
1 Dr. Sachin Mohal Three Mohal, Sangwan & Kumar 2017 Mohal, S., Sangwan, S.S. & Kumar, R., 2017, ‘Experimental Investigations in Powder Mixed Electric Discharge Machining of Al6063 Aluminum Alloy’, Research Cell: an International Journal Of Engineering Sciences 25, 97-102.
2 Dr. Rajesh Sharma Two Arora & Sharma 2017 Arora, R. & Sharma, R., 2017, ‘Experimental investigation of evaporative condenser with two cooling pads for window air-conditioner’, Research Cell: an International Journal of Engineering Sciences 25, 11-16.
3 Mr. Arvind Kumar Three Kumar, Singh & Kumar 2018 Kumar, A., Singh , H. & Kumar, V., 2018, ‘Study the Parametric Effect of Abrasive Water Jet Machining on Surface Roughness of Inconel 718 using RSM-BBD technique’, Materials and Manufacturing Process, https://doi.org/10.1080/10426914.2017.1401727 (SCI)
4 Mr. Ravinder Singh Three Bhardwaj, Singh & Singh 2017 Bhardwaj, B., Singh, R. & Singh, R., 2017, ‘To Study The Effects of Welding Parameters on MIG Welding of Stainless Steel Alloy-202’, International Journal of Science Technology & Engineering, 4(1), 131-140.
5 Mr. Parveen Saini One Saini 2017 Saini, P.K., 2017 ‘Performance and analysis of electric discharge machining on AISI D3 Steel by using Taguchi Method’, Journal of Engineering Research and Studies, 3(3), 17-20.
6 Mr. Rahul Mehra Two Srivastava & Mehra 2017 Srivastava, H. & Mehra, R., 2017, ‘Fabrication of EN-9 round bar using center lathe machine and calculating its tensile strength under universal testing machine’, Journal of Emerging Technologies and Innovative Research 4 (6), 234-239.
7 Mr. Rakesh Kumar Three Rakesh et al. 2017   Kumar, S., Kumar, R., & Kumar, M, 2017, ‘Experimental investigations of oxidation stability of biodiesel produced from Prunus armeniaca oil (apricot oil) and effect of various antioxidants on stability, engine performance and emission’. Fuel 216, 861–869.
8 Dr. L.C. Singal Three Singal et al. 2017 Singal, L.C. Gill, RS & Kang PS,, 2017. ‘Estimating Mechanical Fatigue Life — A Review IJRASET’ 5, (12).
9 Mr. Paramvir Singh Kang Three Kang et al. 2017 Kang PS, Singal, L.C. & Gill, RS, 2017, ‘Effectiveness of sintered abrasive in magnetic abrasive finishing-A Review’. IJAMTES, 7, 55-59.
Sr. No. Name of Faculty Authors Name of Author with Year Name of Paper
1 Mr. Rakesh Kumar Two Rakesh et al. 2017 Kumar, R. & Kumar, S., 2017, ‘Application of Biodiesel produced from Argemone Mexicana oil in Direct Injection Compression ignition Engine, International Conference on Advancements and Futuristic Trends in Mechanical & Material Engg., SUS Tangori, India, November 2-4, 2017.
Author(s) Title National/Internation Journal Year
Gurkiratsingh bhatia Cold Flow Analysis In An Annular Gas Turbine Combustor Using Cfd Tool International IJAERD 2016
Manmohan Singh International IJERD 2016
Rohit Kumar, Inderjeet Singh A review of friction stir welding on aluminum alloys National National Conference 2016
Ms. Aishna Mahajan comparative Study of Tyre Rubber and V-Belt Rubber:Composition and Mechanical Properties International IOSR 2016
Mr. Satish Kumar Effect of Varying Surface Grinding Parameters on the Surface Roughness of Stainless Steel International International Journal of Engineering Research and General Science 2015
Mr. Ranjot Singh Virk Modification in Fixture by Computer-Aided-Fixture Design (CAFD) in Manufacturing Process of Steering Nut to Reduce Defects International International Journal of Engineering Development and Research 2015
Mr. Ramandeep Singh Dhindsa An Experimental Study on the performance of Liquid Desiccant Dehumidification system International Mechanica confab 2015
Mr.Gagandeep Singh Dhindsa Experimental Study of Machining Characteristics of C-45 Steel using Electro Discharge Machining International IJCET 2015
Mr. Ramandeep S. Deorda Effect of Tool Shoulder diameter on AA6101/B4C Composite Fabricated by Friction Stir Processing International IJESIRD 2015
Mr. Parveen Saini Paper titled “Study the Influence of EDM Parameters on Cobalt-Bonded Tungsten Carbide Conductive Ceramic International IJEMR 2015
Mr. Gurkirat Singh Cold Flow Analysis in an Annular Gas Turbine Combustor using CFD Tool” International IJAERD 2015
Mr. Taljeet Singh “Modification in Fixture by Computer-Aided-Fixture Design (CAFD) in Manufacturing Process of Steering Nut to Reduce Defects” International IJEDR 2015
Mr. Anikate Study the Influence of EDM Parameters on Cobalt-Bonded Tungsten Carbide Conductive Ceramic, International IJEMR 2015
Mr. Farman Experimental investigation to evaluate the performance,emission,and combustion characteristics of diesel engine with neem oil biodiesel” International IJESIRD, 2015
Mr. Anam Singh Anam Singh, V.P. Agrawal,”CFD simulation of spray cooling: Review and Problems,” International IJETMAS, 2015
Mr. Ramesh kumar To Study Effect of Austempering Time and Temperature On Spheriodal Graphite Iron International IJEMR 2015
Author(s) Title National/Internation Journal
Dr. RS Rajoria Nano Technology – Future Ahead National TIME-2k8
Dr. RS Rajoria Study of Charging Media in a Cement Ball Mill National TIME-2k7
Dr. RS Rajoria Stirling Miniature Cryocoolers – An Overview National TIME-2k8
Dr. RS Rajoria Automated CNC Part Programming and Process Planning For Turned Components National TIME-2k8
Satish Kumar & N. P. Singh Comparison of Thermal Performance of Solar Air Heater Having Thermal Mass National Proceeding
Satish Kumar & N. P. Singh Experimental Analysis of Thermal Performance of a Solar Air Heater Having Thermal Mass (Iron Chips) Placed on Collector Surface and Compare it with Simple Flat Plate Collector Solar Air Heater. National Proceeding
Parveen kr. Saini Investigating the effect of Tool and Work Material in Ultrasonic Machining of Titanium Alloys National National Conference on Present Scenario and Advance Technology in Mechanical Engineering
HARJOT SINGH A REVIEW STUDY TO ANALYSE INFLUENCE OF EDM PARAMETERS ON MRR SURFACE ROUGHNESS AND TOOL WEAR RATE ON CBN AS WORK MATERIAL USING TAGUCHI L27 National National Conference ON advancement in Simulation & Experimental Techniques
HARJOT SINGH A Study Towards Multi-Response Optimization of Edm Process for Tungsten Carbideusing Response Surface Method National National Conference ON advancement in Simulation & Experimental Techniques
Rohit Kumar Inderjeet Singh A review of friction stir welding on aluminum alloys National National Conference
Name Position D.O. J. Education Quali.
Mr. Paramvir Singh Kang AP 6-Aug-09 Ph.D pursuing
Mr. Gurpreet Singh Bedi AP 16-Jan-07 Ph.D pursuing
Mr. Ramandeep Singh Dhindsa AP 7-Sep-12 Ph.D pursuing
Mr.Vikasdeep Singh Mann AP 8-Jul-12 Ph.D pursuing
Mr. Inderjeet Singh AP 9-Jul-12 Ph.D pursuing
Mr. Ramandeep S. Deorda AP 21-Jan-13 Ph.D pursuing
Mr. Farman Khan AP 24-Jul-13 Ph.D pursuing
Mr. Pawan Kumar AP 18-Jul-14 Ph.D pursuing
Date Topic Resource Person
01.09.2016 Understanding Simple and Principal Stresses & Strains Dr. Dhiraj Mahajan IIT Ropar
09.09.2016 Latest Trends in manufacturing Technology Dr.HarmeshKansal UIET
16.09.2016 Operation Research Mr. Amit Dixit BHEL, India
21.09.2016 Industrial Automation, Mechatronics Mr. Deepak Sharma
Prolific Systems Technologies Pvt. Ltd
23.09.2016 Creativity, Innovation and Entrepreneurship Dr Deepika Bhalla& JPS Sibia
PTU Nalanda School of TQM & Entrepreneurship
10.10.2016 Capacitor Discharge ignition and iSmart Technology Mr. Dushyant Sharma
Dy. Manager HeroMotoCop Limited
21.10.2016 Advancement in submerged arc welding. Dr. Jagjitsingh
PEC University of Technology
Title Registration Date
Automated Mehndi Applying Machine TEMP/E1/ 31228/2015DEL TEMP/E1/ 31228/2015DEL
Wireless Electricity Transmission System 2507/DEL/2015 14/8/15
Head Mounted Display Navigation 2510/DEL/2015 14/8/15
Handheld Drill Machine With Dust Removal TEMP/E-1/24933/2015¬DEL 14/8/15
A Plaster Of Paris (Pop) Applicator And Methods There of 2472/DEL/2015 11/8/15
Prevention Of Engine Oil Leakage From Turbocharger 2456/DEL/2015 10/8/15